Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl RMA 443.2 C Gebrauchsanleitung

23 Spare Parts and Accessories

– Vibration value a
hv
with EN 20643, EN 60335-2-77, handlebar:
1.80 m/s²
The indicated vibration values were measured in
accordance with a standardised test method and
can be used for the purpose of comparing electri‐
cal appliances. The actual vibration values that
occur may deviate from the indicated values,
depending on the type of application. The indica‐
ted vibration values can be used for an initial
assessment of the vibration load. The actual
vibration load must be assessed. Times during
which the electrical appliance is switched off,
along with times during which it is switched on
but running without load, can also be taken into
consideration.
For information on compliance with Employers'
Vibration Directive 2002/44/EC and
S.I. 2005/1093, see www.stihl.com/vib .
22.7 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
23 Spare Parts and Accesso‐
ries
23.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
23.2 Essential Spare Parts
– Blade: 6338 702 0130
– Blade fastening screw: 9008 319 9028
– Washer: 0000 702 6600
0478-131-9946-D
measured in accordance

24 Disposal

24.1 Disposing of the Lawn Mower
Information on disposal is available from your
local authority or from a STIHL dealer.
Improper disposal may be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose of the product with domestic
waste.
25 EC Declaration of Con‐
formity
25.1 STIHL RMA 443.2 C Lawn
Mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: cordless lawn mower
– manufacturer's brand: STIHL
– type: RMA 443.2 C
– cutting width: 41 cm
– serial number: 6338
complies with the relevant provisions of Direc‐
tives 2000/14/EC, 2006/42/EC, 2014/30/EU and
2011/65/EU and has been developed and manu‐
factured in accordance with the versions of the
following standards valid on the date of manufac‐
ture: EN 60335-1, EN 60335‑2-77, EN 55014-1
and EN 55014-2.
Approved body involved:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
90431 Nuremberg, Germany
The measured and guaranteed sound power lev‐
els were determined in accordance with Directive
2000/14/EC, Appendix VIII.
– Measured sound power level: 89.2 dB(A)
– Guaranteed sound power level: 90 dB(A)
The technical documents are stored at STIHL
Tirol GmbH.
The year of manufacture and machine number
are indicated on the lawn mower.
Langkampfen, 02.01.2020
STIHL Tirol GmbH
English
43