Operation; Menu Structure - EuroLite LED PR-100/32 Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and
sound control
Microphone sensitivity
for sound control
Individual color mix
Dimmer
Silent scene
DMX lost
Slave mode
Display
96CH
48CH
Addr 8CH
5CH
3CH
Stat S 01-17
Auto Au 01 – 12
Soun So 01 – 12
SPEE SP 1-9
SEnS SE 1-9
r000-255
Colo g000-255
b000-255
diMM dI 1-dI 9
on
SILE
oFF
Blackout
Hold
Full
DMX lost
Static
Auto
SLAV SLAU
22/28
d001-512 96-channel mode and start address
d001-512 48-channel mode and start address
d001-512 8-channel mode and start address
d001-512 5-channel mode and start address
d001-512 3-channel mode and start address
Constant lighting in one of 17 colors
Program 1 - 12
Program 1 - 12
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
Total brightness (Stat, Auto, Soun,
and Colo modes) dark > bright
LEDs off during periods without
music or bass-beat
Program continues automatically
during periods without music or
bass-beat
LEDs go off
Spot holds the last received signal
All LEDs 100% on
Goes to pre-selected static color
01-25
Goes to pre-selected auto program
01-09
Slave mode
Function
00129807, Version 1.0