Deleting Measured Values - Sanitas SBC 22 Gebrauchsanweisung

Saving, accessing and deleting measured
values
User memory
The results of every successful measurement are stored to-
gether with the date and time. The oldest measurement is
overwritten in the event of more than 60 measurements.
• To retrieve the measurement, press the memory button
.
A A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
To change the user memory, press and hold the
memory button for approx. 2 seconds.
Average values
• Press the memory button
AM flashes on the display. AM
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5 a.m. – 9 a.m.).
.
• Press the memory button
PM flashes on the display. PM
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6 p.m. – 8 p.m.).
Individual measured values
• When you press the memory button
again, the last individual measurement is
displayed (in this example, measurement
03).
• When you press the memory button
again, you can view your individual measured values.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the START/
STOP button .

Deleting measured values

• To clear the relevant user memory, you must first select
a user memory.
• Start the retrieval of the average measured values.
A flashes on the display and the average value of all
saved measured values in this user memory is displayed.
33
.