eta Vintero Bedienungsanleitung Seite 25

1) BLOWING MODE
3 different air blowing modes are available. Normal, natural and sleep modes. The mode
is selected by pressing B2 button. It is possible to switch modes within both functions (cooling
and fan).
A) Regular mode (
is maintained the same.
B) Natural mode (
switches on and off the ventilation depending on the speed setting, while changing the
blowing speed. The blowing intensity is changed as follows when the respective blowing
speed is set up:
High speed
Medium speed
Low speed
Pause
High speed
Medium speed
Low speed
Pause
High speed
Medium speed
Low speed
Pause
C) Sleep mode (
This mode is identical in many aspects to the natural mode. The main difference is that after
expiration of 1 hour, the speed setup is decreased to the lowest level. This means that if you
set the high speed in the sleep mode, the appliance shall switch to the medium speed mode
after 30 minutes, and to the low speed mode after 30 minutes. If you start with the medium
speed setting, the appliance shall switch to the low speed mode after the respective period.
The low speed mode is then on without any change in the blowing frequency and intensity.
2) BLOWING SPEED
3 air blowing speeds are available (low
cooling or ventilation modes by pressing B6 button. The respective setting is indicated on
display by the respective icon B9.
) depends on manual setting of the blowing speed, which
) tries to imitate air circulation in the nature. Therefore it alternately
Low speed
5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
Medium speed
5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
High speed
5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
)
- medium - high
25 / 54
GB
) to be selected during the