Setting The Time; Setting The Alarm - Grundig CMS 2000 BT Bedienungsanleitung

SETTINGS
Setting­the­time
1
To set the time in standby mode, press and
hold »CLOCK« for about 2 seconds.
– Display: »24 HOUR«.
2 Select the hour format (12 or 24 hours) by
pressing » ­
3
firm with »CLOCK«.
– The hours flash.
3 Set the hours by pressing »
» « and confirm with »CLOCK«.
4
– The minutes flash.
4
Set the minutes by pressing »
« and confirm with »CLOCK«.
– Display: the current time.
28­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
« or » « and con-
4
­ « or
3
­
« or »
3
Setting­the­alarm
1
To set the alarm in standby mode, press and
hold »ALARM« for about 2 seconds.
– Display: »TIMER«.
2­The alarm programs displays; »disc«, »USB«
or »TuneR«. Press »
» « and confirm with »ALARM«.
4
– The hours flash.
3
Set the hours by pressing »
» « and confirm with »ALARM«.
4
– The minutes flash.
4
Set the minutes by pressing »
4
« and confirm with »ALARM«.
– The volume flash
The volume displays »VOL 12«. Select the vol-
5­
ume with »
firm with »ALARM«.
– The volume can be selected »VOL 01« to
»VOL 31«.
6­
The symbol "TIMER" will then display down on
the right screen to confirm the programming of
the alarm.
Notes:
If you want to disable the alarm, press once
7
ALARM
the "
"TIMER" will disappear from the screen.
­ « or
3
­
« or
3
­
3
­ « or » « and con-
3
4
" button and the symbol
« or »
4