Imperial DABMAN 100 Bedienungsanleitung Seite 52

6 . OPERATION
Various options are available (timer switch off: display will switch from full to
low brightness after a preselected time interval, On setting: selecting display
brightness when commands are input. Dim setting: display illumination
In standby mode resp. when no commands are input). Selection and setting
are made using the
key.
E
NOTE:
the display of the DABMAN 100 will consume the most energy if the illumi-
nation is set to full brightness. Changes to the lighting settings can therefore
affect the power consumption of the radio. The consumption values set out in
Chapter 10 were measured using the standard settings.
6.2.6 Passive standby
This menu item allows you to activate the passive standby mode of the
DABMAN 100. Passive standby means that the radio will automatically switch
to the standby mode after a specified period of time (2, 3, 4, 5 or 6 hours) if
during this period no operating procedures are carried out (changing stations,
adjusting volume etc.). This function is deactivated in the default mode. To set
this option, proceed as follows:
› Press the MENU
› Use the ◄►
› Confirm by pressing the
› Use the ◄►
› Confirm by pressing the
Operating Manual
◄► keys, confirm your selection by pressing the
key on the remote control.
keys to navigate to the item "Passive standby".
ENTER
keys to select the desired time interval.
ENTER
key.
key.
52
ENTER