Imperial DABMAN 100 Bedienungsanleitung Seite 50

6 . OPERATION
In the next step you can select the frequency of the alarm. Here, the following
options are available: Weekdays (alarm is activated for Monday to Friday, Once
(alarm is activated only once), Weekend (alarm is active only on Saturday and
Sunday). Use the
the ENTER key.
In the next step you can determine the volume of the alarm, which you can se-
E
lect by using the
made by observing a volume bar on the display, confirm by pressing the
key. In the last menu point you can activate or deactivate the alarm (option on
or off) using the
Alternatively:
Press the ALARM
tion as described above. The alarm has now been set, the display will show a
stylized alarm logo in the upper left corner next to the time. When the alarm
switches on, you can use the Snooze key to interrupt the alarm. This will then
go off again after a specified period (approx. 10 minutes).
6.2.3 Equalizer
The equalizer allows you to adjust the sound of the DABMAN 100 individually.
Here you can either define an own sound profile (select "My EQ") or you can
select one of the pre-defined sound profiles. To call up the equalizer menu
proceed as follows:
› Press the MENU
› Use the ◄►
› Confirm by pressing the
› The following options are available for selection: , Normal, Classic, Jazz, Pop,
Rock, Flat.
› Make your selection using the
Operating Manual
◄► keys to select the desired option, confirm by pressing
◄► keys (◄ volume lower, ► volume
◄► keys. Confirm by pressing the
key on the remote control, then proceed with the configura-
key on the remote control.
keys to navigate to the item "Equalizer".
ENTER key.
◄► keys, confirm by pressing the
50
higher), the setting can be
ENTER key.
ENTER
ENTER
key.