SPORTSTECH SX 400 Benutzerhandbuch Seite 28

Slide the Handlebar Post (pt.17) into
the handlebar post housing on the main
frame(pt.16). You will have to slacken
the knurled section of the L Shape
Knob (pt.26) and pull the knob back
and then select the desired height.
Release the knob and retighten the
knurled portion.
Then fix the Handlebar (pt.18) with a
flat washer 1 (20) and L Shape knob
(19)
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
Fix the Computer (pt.78) onto the
Computer Holder with bolt (pt.55),
connect the plug (A1&A2),
The Pedals (pt.1 L & pt.1 R) are
marked „L" and „R" - Left and Right.
Connect them to their appropriate crank
arms. The right crank arm is on the
right- hand side of the cycle as you sit
on it. Note that the Right pedal should
be threaded on clockwise and the Left
pedal counter-clockwise.
28