Herunterladen Diese Seite drucken

Eibenstock EHB 20 / 2.4 Originalbetriebsanleitung Seite 13

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the
first use, the user should absolve a practical training.
If the connection cable gets damaged or cut during the
use, do not touch it, but instantly pull the plug out of the
socket. Never use the tool with a damaged connection
cable.
Prior to drilling in walls and ceilings, check them for
hidden cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
The tool must neither be wet nor used in humid
environment.
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill into asbestos-containing materials.
Do not carry the tool at its cable, and always check the tool, cable and
plug before use. Have damages only repaired by specialists. Only
insert the plug into the socket when the tool switch is off.
Modifications of the tool are prohibited.
When the machine runs outside, always use a protection switch
(30 mA max.) against fault current.
Plug and switch the machine off if it is not under supervision, e. g. in
case of putting up and stripping down the machine, in case of setting
up and striking, voltage drop or when fixing or mounting an accessory.
Switch the machine off if it stops for whatever reason. This way, you
avoid that it starts suddenly and not under supervision.
Do not use the machine if one part of the housing is damaged or in
case of damages on the switch, cable or plug.
While working always lead the line cord and extension cord to the back
away from the machine.
Electric tools have to be inspected visually by a specialist in regular
intervals.
Do not touch rotating parts.
The tool may be used only in two-hand operation or with the drill rig.
Keep the handles dry, clean and free of oil and grease.
Persons under 16 years of age are not allowed to use the machine.
13

Werbung

loading