Packaging Content; Introduction - LD Systems AMP 106 T Bedienungsanleitung

NOTICE:
In the case of conversion or retrofit kits or accessories provided by the manufacturer,
be sure to follow the enclosed instructions.
CAUTION HIGH VOLUME AUDIO PRODUCTS!
This device is intended for professional use. Commercial operation of this device is
subject to applicable national regulations and guidelines for accident prevention.
Hearing Damage from High Volume and Continuous Exposure: Use of this product
may generate high sound pressure levels (SPL) that can cause hearing damage.
Avoid exposure to high volume levels.
NOTES FOR INDOOR INSTALLATION EQUIPMENT
1. Units for installation applications are designed for continuous operation.
2. Units for indoor installation are not weatherproof.
3. Surfaces and plastic parts of installation equipment can also age, e.g. due to UV
radiation and temperature fluctuations.
This does not usually lead to functional restrictions.
4. with permanently installed units, the deposition of impurities, e.g. dust, is to be
expected. Be sure to observe the care instructions.
5. Unless explicitly stated otherwise on the unit, the units are intended for
installation heights of less than 5 m.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution
partner immediately after purchase if the delivery is not complete or if it is damaged.
The packaging includes:
• 1 x AMP 106 T installation amplifier
• 1 x power supply unit
• 1 set of terminal blocks
• 1 x mounting set for under- or on-table mounting
• User manual

INTRODUCTION

The AMP 106 T is a 1-channel mini installation amplifier from the TICA® series and is ideal for use
in sound installations where small dimensions, passive cooling and high efficiency are required.
The highly efficient 60W Class-D amplifier, with Lo-Z / Hi-Z selector switch and 4 Ohm / 100V / 70V
outputs, is convection-cooled and a straightforward solution for professional installers.
With a size of 1/4 19" rack, 1U, the mini AMP 106 T fits perfectly in any installation location.
The supplied mounting plates offer maximum flexibility and facilitate discreet mounting,
whether on the table or on the wall. Installation in suspended ceilings is also no problem
thanks to the compact size and passive cooling.
7