How To Remove: Shelf Supports; How To Use: Catalytic Cleaning - Electrolux EB7L4XSW Benutzerinformation

Clean all accessories after each use and let them dry. Use only a microfibre
cloth with warm water and a mild detergent. Do not clean the accessories in a
dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.

11.3 How to use: Catalytic cleaning

The cavity is coated with catalytic enamel. It absorbs fat during catalysis.
Spots or discolouration of the catalytic coating have no effect on the cleaning.
Before the catalytic cleaning remove all accessories.
Step 1
Select Menu / Cleaning
and press three times.
Duration: 1 h.The catalytic enamel is self cleaning, do not clean it with a cloth.
Clean the oven with catalytic cleaning
Step 2
When the cleaning ends the
signal sounds. The oven turns
off.
CARE AND CLEANING
1
2
When the oven is cold,
clean the cavity with a wet
Step 3
soft cloth.
127/136