System Settings; Service-Water Target Temperature - Grasslin Famoso 2000 Bedienungsanleitung

40

7. System Settings

7.1 Service-water target temperature

Check in the operating manual of your gas
heater as to whether the provision of service
water* is supported.
Note: If the gas heater does not support
the provision of service water, then
no corresponding symbols/menu
items are displayed.
With certain types of gas heaters it
is not possible to adjust the service-
water target temperature via the
room thermostat-clock.
The preset value can only be read.
Press SYS. button 1x
For example, the display indicates H60°C
(as shown in display).
Set target value:
TEMP+ = Increase temperature
TEMP– = Decrease temperature
TEMP+
Press button and change temperature.
TEMP-
41
GB