Starting And Stopping; Forward Movement - Columbus AKS 70 BM 62 Original Bedienungsanleitung

Vacuum sweeper
AKS 70|BM 62

Make sure all connections (cable terminals, sockets, plugs, etc.) are always well tight and in good conditions

Do not rest metal tools on the batteries.

Keep the batteries clean and dry, if possible using antistatic cloths.

Top up with distilled water every time the level of the electrolyte falls to 5 - 10 mm from the splash guards.

Avoid overcharging and keep battery temperature below 45 - 50° C.

Maintain any centralised topping-up systems in good working order and service regularly.

Risk of electric shocks and short circuits; for safety's sake, before performing any maintenance or repairing on the batteries (or on
the machine), remove the +/- terminals from the battery poles.

Risk of explosions during charging; this can occur when recharging with an unsuitable battery charger (depending on battery
Amperes)

During battery recharging operations, or whenever the battery charger plug is inserted, the machine must never be switched on or
moved (even manually)
1 - Check the level of the battery solution and if necessary top up with distilled water.
2 - Make sure the connector Part. 1 Fig. 13 is well inserted in the socket Part. 2 Fig. 13.
IMPORTANT: To start the machine, first of all sit in the driver's seat. If the operator is not sat, or if he/she stands up during start up, the
START UP :

Turn the key Part. 6 of switchboard clockwise

Turn the switch Part. 5 of switchboard to start the engine, the rotation of brushes and to activate suction.
The machine is in working position with the central brush lowered and suction engaged.

FORWARD MOVEMENT:


Position the switch Part. 1 of switchboard forwards and press the forward pedal with the foot Part. 6 Fig. 2.
REVERSE MOVEMENT:

Position the switch Part. 1 of switchboard backwards and press the backward pedal with your foot Part. 6 Fig. 2
NEUTRAL:

With the switch Part. 1 of switchboard in central position the machine is in neutral.
STOP:

Turn the switch Part. 5 of switchboard anticlockwise

Turn the key Part. 6 of switchboard anticlockwise.
CHAP. 10 – CHECK-LIST BEFOR STARTING
CHAP.11 – STARTING AND STOPPING
BEFORE PROCEEDING MAKE SURE YOU HAVE READ ALL PREVIOUS CHAPTERS.
ATTENTION PLEASE:
machine will stop.