Screen Settings - DJI High-Bright Remote Monitor Handbuch

Custom Hand Grips
Set the function of the specific buttons and dials on the left and right hand grips if the Ronin 4D
Hand Grips are mounted to the monitor.

Screen Settings

Set the frame guide ratio and transparency, enable or disable the safety zone and center marker,
and set the safety zone ratio and brightness.
When an anamorphic widescreen lens is in use, set the appropriate anamorphic desqueeze
display ratio to restore the monitoring liveview to the normal effect.
When specific cameras are in use with the transmitter device, enable the virtual widget to set the
camera parameters using the virtual buttons on the monitor screen.
Users can also use the color calibration function in Screen Settings.
Color Calibration
Users can import a 33 point 3D LUT file for color calibration with .CUBE in this menu to apply
color calibration according to their requirements. Only use letters, numbers, or underscore "_" to
name the file and DO NOT use special characters or spaces.
When generating the file for color calibration, make sure to enable Color Calibration Mode
in this menu before the color calibration steps. Otherwise, there will be color difference
after color calibration is applied.
1. Copy the file for color calibration to the root directory of the microSD card and insert the
microSD card into the slot on the monitor.
2. Tap Import Color Profile in the Color Calibration menu. The files for color calibration will be
listed on the screen.
3. Tap to the right of the file and tap Import.
4. The color calibration is applied to the monitor after successful import.
5. Tap Reset Settings in the Color Calibration menu if color calibration is not required.
Unit
Set the unit of the focus meter on the monitoring interface to Imperial (feet) or Metric (meters).
Language
Select the system language in the language list.
Local Playback
View and play the locally recorded videos on the microSD card in the playback view.
The monitor will play the last recorded video automatically after entering the playback view. Tap
to view the video list. Tap
About and Help
View information such as the firmware version and serial number under About and scan the QR
code to view the video tutorials under Help.
©
13 2023 DJI All Rights Reserved.
to return to the monitoring interface.