Screen Settings - DJI High-Bright Remote Monitor Handbuch

Gyroscope Control
Enable or disable Gyroscope Control. The Gyroscope Control icon will not appear on the
monitoring interface when Gyroscope Control is disabled.
Hand Grip Dial
This setting will appear only when using with DJI Video Transmitter. Set the function of the dial on
the right hand grip if the Ronin 4D Hand Grip is mounted to the monitor.

Screen Settings

Set the frame guide ratio and transparency, enable or disable the safety zone and center marker,
and set the safety zone ratio and brightness.
When an anamorphic widescreen lens is in use, set the appropriate anamorphic desqueeze
display ratio to restore the monitoring liveview to the normal effect.
When specific cameras are in use with the transmitter device, enable the virtual widget to set the
camera parameters using the virtual buttons on the monitor screen.
Language
Select the system language in the language list.
Local Playback
View and play the locally recorded videos on the microSD card in the playback view.
The monitor will play the last recorded video automatically after entering the playback view. Tap
to view the video list. Tap
About and Help
View information such as the firmware version and serial number under About and scan the QR
code to view the video tutorials under Help.
©
13
2022 DJI All Rights Reserved.
to return to the monitoring interface.