Herunterladen Inhalt Inhalt Diese Seite drucken

DJI High-Bright Remote Monitor Handbuch Seite 13

Vorschau ausblenden Andere Handbücher für High-Bright Remote Monitor:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 91
approaching being overloaded, and red means it is overloaded.
13. Monitor Volume
Move the slider to adjust the volume from the 3.5mm audio output jack. The remote monitor
does not have a built-in speaker. Users can only monitor the volume using the 3.5mm audio
output jack.
14. Recording Button and Timecode
Tap to start or stop recording locally or remotely. The icon to the right of the timecode shows the
recording device in control currently. Users can select the device in the recording device setting.
When HDMI is set as the input signal, only recording locally will be performed.
15. LiDAR Focus Assistant Settings
The icon is active only when using with the DJI LiDAR Range Finder (RS). Tap to enter the
menu to configure parameters and functions related to the LiDAR range finder and lens. Refer
to the LiDAR Focus Assistant Settings chapter for more information.
16. LUT
Tap to switch the LUT effect of the SDI and HDMI video output from the remote monitor or
remote monitor expansion plate. Supported LUT options vary by the transmitter device used.
Tap the icon in the upper right corner to import and apply the LUT files from the microSD
card to the remote monitor.
17. Exposure Assistant/Focus Assistant Settings
Focus Meter: when enabled, the focus meter will be displayed on the right of the screen. It
can be used to assist focus when the Ronin 4D Hand Grips or DJI Three-Channel Follow
Focus is used. The focus plane distance (the yellow arrow pointed to) and depth of field (area
within yellow dotted lines) can be displayed in the focus meter and LiDAR waveform when
the focus point information and aperture value are read.
LiDAR Waveform: when enabled, the ranging points within the focus area of the LiDAR range
finder will be displayed on the right of the screen in a simplified top-down view.
When using the remote monitor with the DJI Video Transmitter, the LiDAR Waveform function will
work only if the DJI LiDAR Range Finder (RS) is connected to the video transmitter via the DJI
LiDAR Range Finder (RS) to DJI Transmission Cable Hub.
75
100
ON
CH1
CH2
©
9
2023 DJI All Rights Reserved.
112G
LiDAR Waveform Effect Image
24.5M
WB
5600
ND
Clear
SS 1/50
B
A001C016
08:02:16:06
IRIS
F2.8
EI
800
60'
ft
ft
30'
60'
20'
30'
15'
20'
12'
15'
12'
10'
10'
8'
7'
8'
6'
7'
5'6
6'
5'
5'6
4'6
5'
4'
4'6
4'
3'6
3'6
3'
3'
2'9
2'9
2'6
A001C016
35
mm
AF

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis