DJI High-Bright Remote Monitor Handbuch Seite 15

75 100
CH1 CH1
CH2 CH2
Tap Twice to Zoom In: when enabled, tap the screen twice on the monitoring interface to
zoom in on the area tapped. Drag the image to view the rest area of the image. The rectangle
on the upper right corner will show where the magnified area is located in the whole image.
Tap twice multiple times to switch the magnification of the display between 2x, 4x, and
original size.
Focus Peaking: when enabled, users can set the display color and percentage for color
peaking or the percentage for aperture peaking.
When Mirror Control mode is enabled in the Ronin 4D main monitor, users can access the
complete live view of the Ronin 4D main monitor on the remote monitor and adjust the
parameters. The touch operations on the live view are the same as those on the Ronin 4D main
monitor. The icons below correspond to the physical buttons on the Ronin 4D main monitor. Tap
the icons on the screen to perform the same functions of the buttons.
18. Home Button
Tap to enter the menu screen.
19. Focus Peak Button
Tap to enable or disable the focus assist display. The function is set to Focus Peaking by
default. Go to the menu, select Display, then Focus Assistant, and set the PEAK Button
Function to LiDAR Waveform and Focus Mag. The function of the icon on the screen of the
remote monitor will be updated accordingly.
20. LUT Button
Tap to enable or disable LUT display. LUTs are customizable. Go to the menu and select
Display then LOOK to set LOOK as an imported custom LUT. Refer to the LOOK section in
the Ronin 4D User Manual for more information.
21. EXP Button
Tap to enable or disable the exposure display. The feature supports Zebra Stripes, Waveform,
and False Color. Go to the menu and select Display then Exposure Assistant to apply
settings.
22. Playback Button
Tap to access playback and play the last recorded video.
©
11 2023 DJI All Rights Reserved.
24.5M WB 5600 ND Clear
B
08:02:16:06 08:02:16:06
False Color Effect Image
SS 1/50 IRIS F2.8 EI 800
A001C0018