Installation, Connection And Initial Commissioning; Positioning - hanseatic HWD75T214DE Gebrauchsanleitung

Installation, connection and initial commissioning

Positioning

Transporting
CAUTION!
Risk of injury!
Improper handling of the appliance
may result in injury.
■ The appliance is very heavy. Never
transport or carry it alone, rather al-
ways with at least two persons.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■ If a trolley is used to move the ap-
pliance, the appliance must be lifted
as shown on the packaging. Always
transport the appliance vertically and
with a built-in transport safety device.
• Check whether the transport route and
the installation site are suitable for the
weight of the washing machine. If in
doubt, ask your landlord or property man-
agement.
Removing the transport safety
devices
WARNING!
Risk of electric shock!
Touching live parts may result in severe
injury or even death.
■ Make sure the appliance is not con-
nected to the power supply whilst the
transport safety devices are being re-
moved or installed.
Installation, connection and initial commissioning
1. Loosen the screws of the transport safety
2. Remove the transport safety devices (14).
3. Close the openings with the covers (32)
4. Keep the transport safety devices in a
devices (14) using a 10 mm wrench.
(14)
(32)
supplied.
safe place. Re-install the transport safe-
ty devices every time the appliance is
moved - when moving home or returning
the appliance!
Page EN-33
(14)