Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remove dead batteries from the device
immediately!
Before using
B efore initial use, remove the protective film
from the device display
enclosed battery.
Inserting / changing
the battery
If the battery symbol
display, the inserted battery is almost drained
and must be replaced. Empty batteries can falsify
the measured result.
To insert the battery proceed as follows:
O pen the battery compartment cover on the
back of the device. You can remove the used
battery more easily with the aid of the mate-
rial strip, which is inside the battery compart-
ment
6
R emove the used battery.
P lug the contacts of the 9 V block battery on
the contacts of the profiled plug. Make sure
you fit the batteries the right way round. This
is specified by the profiled shape of the con-
tacts. Also ensure without fail that the mate-
rial strip is underneath the battery.
I nsert the battery in the battery compartment
and close the cover again, so that it audibly
latches into place.
9
. Just pull on the material strip.
and insert the
2
appears in the
GB/IE
9
Werbung
Inhaltsverzeichnis
