Quick Start Guide - Yamaha RX-V765BL Bedienungsanleitung

When you use this product for the first time, perform the steps below. See the related pages for details of operations and
settings.
Step 1: Prepare items for setup
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7.1-channel sound system.
Video monitor
Front left speaker
Center speaker
Components
(such as DVD player)
Surround left speaker
Requirements
Speakers Front speaker
Center speaker
Surround speaker
Surround back speaker
Active subwoofer
Speaker cable
Subwoofer cable
Reproduction component such as DVD player
Video monitor such as TV
Video cable or HDMI cable
Audio cable
y
• Prepare at least two (front) speakers. Speakers other than front speakers
may be used in the following order of preference:
1 Two surround speakers
2 One center speaker
3 One or two surround back speakers
• If your video monitor is a CRT, we recommend that you use magnetically
shielded speakers.
• An audio cable is not required when you use an HDMI cable.
8
En

Quick start guide

Front right speaker
Subwoofer
Surround right speaker
Surround back right
speaker
Surround back left
speaker
qty.
Step 2: Set up your speakers
Place your speakers in the room and connect them to this
unit.
• Placing speakers
• Connecting speakers
y
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (see page 21).
Step 3: Connect your components
Connect your TV, DVD player, or other components.
• Connecting a video monitor
• Connecting other components
• Connecting a multi-format player or an
external decoder
• Connecting an external amplifier
• Connecting a Yamaha iPod universal
dock or Bluetooth wireless audio receiver
• Connecting the FM and AM antennas
2
1
Step 4: Turn on the power
2
Connect the power cable and turn on this unit.
2
• Connecting the power cable
1
• Turning this unit on and off
5
Step 5: Select the input source and start
1
playback
1
Select the component connected in the step 3 as an input
1
source and start playback.
2
• Basic procedure
2
• Selecting sound field programs
y
• This unit supports the SCENE function that changes the input source and
sound field program at one time. Four SCENE are preset for different
purposes for Blu-ray disc, DVD and CD. You can select from a SCENE
from those just by pressing a remote control key. See page 24 for details.
☞P. 10
☞P. 11
☞P. 15
☞P. 16
☞P. 18
☞P. 18
☞P. 19
☞P. 20
☞P. 20
☞P. 20
☞P. 24
☞P. 27