Siemens ET 200S Montage- Und Bedienhandbuch Seite 245

English
Owing to changes to Standard EN 61131-2 (04/2008), the following information replaces all the
corresponding information in the " Voltages, currents, potentials" section of the technical specifications in
the manual.
In Section 7.2.6 "Technical specifications of the PM-E F pm DC24V PROFIsafe" (6ES7138-4CF03-0AB0):
Isolation in the series tested with
ET 200S bus connection and peripherals (DOs, P1/P2 rail)
In Section 7.3.6 "Technical specifications of the PM-E F pp DC24V PROFIsafe" (6ES7138-4CF42-0AB0):
Isolation in the series tested with
ET 200S bus connection and peripherals (DOs, P1/P2 rail)
In Section 7.4.6 "Technical specifications of the PM-D F DC24V PROFIsafe" (3RK1903-3BA02):
Isolation in the series tested with
ET 200S bus connection and peripherals (SGs, U 1 rail)
In Section 7.5.10 "Technical specifications of the EM 4/8 F-DI 24VDC PROFIsafe"
(6ES7138-4FA04-0AB0):
Isolation in the series tested with
ET 200S bus connection and peripherals (DIs, P1/P2 rail)
In Section 7.6.8 "Technical specifications of the EM 4 F-DI/3 F-DO DC24V PROFIsafe"
(6ES7138-4FC01-0AB0):
Permissible potential difference between
Shield and ET 200S bus connection
Shield and peripherals (DIs, DOs, P1/P2 rail)
ET 200S bus connection and peripherals (DIs, DOs, P1/P2 rail)
Isolation in the series tested with
Product Information
A5E03324236-02
2545 VDC/2 s
2545 VDC/2 s
2545 VDC/2 s
2545 VDC/2 s
75 VDC/60 VAC
75 VDC/60 VAC
250 VAC
3