Sharp VC-H92HM Serviceanleitung Seite 33

VC-H91GM(BK)
VG-H91SM(BK}
VC-H92GM(BK)
2. Mounting the shifter (on the back of the
1. Make sure that the loading gear is at the point
mechanism chassis).
(1) as shown below.
(Bottom Side of mechanism chassis) Phase-Matching
Point @
Figure 4-49.
Loading gear (T)
Sifter »~__ s~"
Insert
Point ©
Insert Cut Washer
Point®@ 1 x.wz1041GE00
Cut Washer
Point @
Insert Point @
Release
Point ©
Phase-Matching
Point
Figure 4-50.
32