Selecting The Operating Mode - Viavi OLA-54 Bedienungsanleitung

6 T OLA-55M
HE
Store ABS -> REF
Edit Ref. Level
Configuration

Selecting the operating mode

The OLA-55M is in Attenuator mode when Attenuator is
displayed in the top bar.
If the display shows Level Control:
 Press the LEVEL CONTR ON/OFF key to switch to
Attenuator mode.
The measurement display
The following display is shown in Attenuator mode:
Fig. 8 Example: Measurement display in Attenuator mode
36
A
AS TTENUATOR
Store actual attenuation as new
reference value.
See „Setting the actual
attenuation as reference level",
page 34
Edit selected reference level
manually.
See „Editing the reference level",
page 34
Open the configuration menu.
See „Configuring the device",
page 25
OLA-54/-55/-55M Viavi