Navigating In The Menus; Configuring The Device; Configuration Menu Overview - Viavi OLA-54 Bedienungsanleitung

CW
Auto-
PERM
ECON
Center of
display

Navigating in the menus

 The measurement display is shown.
 Press [MENU ENTER] to open the MAIN menu.
The MAIN menu opens.
To select a menu item:
1. Press [] to highlight an item.
2. Press [MENU ENTER] to select the item.
To leave a menu without making any changes:
 Press [PREV].

Configuring the device

This chapter describes the basic settings in the
Configuration menu.

Configuration menu overview

 The measurement display is open.
 Press [MENU ENTER] to open the MAIN menu and
select Configuration.
The CONFIGURATION menu opens:
Viavi
Signal modulation
 CW: Continuous wave
 Auto-: Auto wavelength detection
 270 Hz, 1 kHz, 2 kHz: modulation
frequency
Power mode
• PERM: Device remains switched on.
• ECON: Device switches off 20
minutes after the last operation.
Shows the measurement results or
setup values.
OLA-54/-55/-55M
4 B O
ASIC PERATION
25