4 B
O
ASIC
PERATION
5. Press [MENU ENTER] to set the new wavelength.
The EDIT -TABLE window is displayed again.
6. Press [MENU ENTER] again to change the view
status.
7. Select Show to show the wavelength in the table
– or –
Select Hide to hide the wavelength in the table.
8. Press [MENU ENTER] to confirm the selection.
Repeat steps 2 through 7 as required.
Setting the display contrast
1. Select Edit Contrast in the CONFIGURATION menu.
The CONTRAST menu opens:
2. Press [] to increase/decrease the contrast.
3. Press [MENU ENTER] to store the value and exit from
the menu.
Setting the factory default values
1. Select Set Factory Default in the CONFIGURATION
menu.
The FACTORY DEFAULT menu opens:
2. Press [MENU ENTER] to set the factory defaults.
28
OLA-54/-55/-55M
Viavi