Viavi OLA-54 Bedienungsanleitung Seite 33

E.g. if only two wavelengths have the attribute "shown",
you can toggle between them with a single keystroke.
To edit the -Table:
1. Press Edit -Table in the CONFIGURATION menu.
The EDIT -TABLE menu opens (displayed
wavelengths may vary according to model and
settings).
2. Highlight the entry to be edited and press
[MENU ENTER].
A window opens:
3. Press [MENU ENTER] again to edit the selected
wavelength (Edit is already selected).
The value to be edited is displayed:
4. Press [] to change the value:
- Press once to change one step at a time.
- Hold down the key to increase the step change rate.
Viavi OLA-54/-55/-55M
4 B O
ASIC PERATION
27