Updating The Firmware - Viavi OLA-54 Bedienungsanleitung

– or –
Press any key to exit from the menu without making
any changes.
Note: Setting the factory default values does not affect
your stored measurement results.
Displaying device information
 Select Show Info in the CONFIGURATION menu.
The INFO menu opens and basic device information
is shown: device name, family, serial number,
calibration date, software version, battery type and, if
applicable, date and time.

Updating the firmware

The latest version of the firmware can be downloaded
from the internet at any time and stored in the EEPROM.
To find the latest firmware version:
1. Visit the Viavi web site at
us/products/network-test-and-certification.
2. Select your model from the product line.
3. Open the download area and download the latest
firmware.
You will also find step-by-step instructions on how to
update the firmware there.
After downloading the firmware to your PC follow the
steps below to install the firmware into your device.
To install the firmware into the device:
1. Select Firmware Update in the CONFIGURATION
menu.
The FIRMWARE UPDATE menu opens:
Viavi
www.viavisolutions.com/en-
OLA-54/-55/-55M
4 B O
ASIC PERATION
29