Description; Product Overview; Accessories - Dräger X-act 7000 Gebrauchsanweisung

en |

Description

The above trademarks are only registered in certain countries and not
necessarily in the country where this document was published.
3 Description
3.1

Product overview

The scope of supply of the device may be expanded by accessories. The basic
set can be combined with sensors and hoses for remote measurement. This
requires the Dräger X-am pump to be connected using the Dräger X-act 7000
coupler.
3.1.1 Dräger X-act 7000
Graphic A
No. Designation No. Designation
1 X-act 7000 7
2 Device keys 8
3 9
Display
4 LED signal light 10
5 Infrared interface 11
6 Gas inlet 12
3.1.2 Basic set
Graphic B
Please observe and adhere to the instructions for use of additional parts, if
provided.
The following components are included in the scope of delivery:
No. Designation
Basic set:
1 X-act 7000
16
Holder for coupler
Ring for carrying strap
Battery cover
Retainer for Dräger MicroTubes
Mini USB port
Gas outlet
Order number
8610800
No. Designation
2
Dräger MicroTubes Demo
3 Torx screwdriver (T10)
4 Carrying strap
5 Batteries with explosion protection
approval (x5)
6 Mini USB cable
7 Instructions for use
3.1.3

Accessories

Graphic C
The device may be used with the following components for remote and sensor
measurements:
No Designation
.
1 X-act 7000 coupler
2 X-am pump
3 Pre-tube holder
4
Accessories
3.1.4 Operation and navigation
The device has three keys. These have been positioned on the device below
the displays which they are used to control (Graphic D/1). Below, these are
referred to as softkeys.
Keys
Used to call up the menu, to navigate down the screen and to control the
left soft key. This key will be referred to as the "DOWN" key.
Instructions for use
Order number
8610290
3712630
8326823
3703133
8318657
9300024
Order number
8610810
8327100
3701985
www.draeger.com
®
|
X-act 7000