Herunterladen Inhalt Inhalt Diese Seite drucken

Siemens SIMATIC RTLS4430G Betriebsanleitung Seite 32

Lokalisierungssysteme
Inhaltsverzeichnis

Werbung

Zulassungen
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
UL
Spannungsversorgung
Das Gerät ist für den Betrieb mit einer direkt anschließbaren Sicherheitskleinspannung
(Safety Extra Low Voltage, SELV) durch eine Spannungsversorgung mit begrenzter Leistung
(Limited Power Source, LPS) ausgelegt. Deshalb muss die Spannungsversorgung mindestens
eine der folgenden Bedingungen erfüllen:
• Es dürfen nur Sicherheitskleinspannungen (SELV) mit begrenzter Leistung (Limited
• Das Netzteil für die Versorgung des Geräts muss NEC Class 2 gemäß National Electrical
Power supply
The device is designed for operation with a directly connectable safety extra low voltage
(SELV) from a limited power source (LPS). The power supply therefore needs to meet at
least one of the following conditions:
• Only safety extra low voltage (SELV) with limited power source (LPS) complying with IEC
• The power supply unit for the device must meet NEC Class 2 according to the National
32
WARNUNG
Power Source, LPS) nach IEC 61140 / EN 62368-1 mit den Versorgungsanschlüssen
verbunden werden.
Code (r) (ANSI / NFPA 70) entsprechen.
WARNUNG
61140 / EN 62368-1 may be connected to the power supply terminals.
Electrical Code (r) (ANSI / NFPA 70).
Betriebsanleitung, 08/2022, C79000-G8900-C517-03
SIMATIC RTLS4430G

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis