Spare Parts; Electrical Diagram - Lincoln Electric MOBIFLEX 200-M Betriebsanleitung

8

SPARE PARTS

The following spare parts are available for the machine (refer to
exploded view Fig. I on page 51).
Article no. Description
Mobiflex 200-M general
0050101240 Hose set LFA for mounting on mobile unit
0605400020 Knurled nut M8
0609590110 Starlock 22 mm
0612010220 Adjusting ring 19x1
0708020140 Aluminium fan wheel 50Hz
0708020150 Aluminium fan wheel 60Hz
0801400010 Housing SF 1400/2400/M.100-NF/mobile units, motor
side
0805030010 Wheel Ø 250 mm black
0805040010 Swivel castor Ø 125 mm with brake
0805040050 Swivel castor Ø 125 mm without brake
0806014020 Cover star knob M8
0840101030 Bush Ø 203 mm
9820310110 Spark arrester
9824000070 Filter cover M.200-M/300-E incl. outlet grid
9824000210 Axle
9830301010 Filter pollution indicator
9850040080 Wheel covers red M.200-M/400-MS/300-E (2 pieces)
9850060050 LongLife filter FCC-50
Mobiflex 200-M 400V/3ph/50Hz
0320000100 Motor 0,75kW, 230-400V/3ph/50Hz
0328260080 Motor protection switch MPS 1.6-2.5A
Mobiflex 200-M 230/3ph/50Hz
0320000100 Motor 0,75kW, 230-400V/3ph/50Hz
0328260090 Motor protection switch MPS 2.5-4.0A
Mobiflex 200-M 230/1ph/50Hz
0321012030 Motor 0,75kW, 115-230V/1ph/50-60Hz
0328260100 Motor protection switch MPS 4.0-6.3A
Mobiflex 200-M 115/1ph/50Hz
0321012030 Motor 0,75kW, 115-230V/1ph/50-60Hz
0328260200 Motor protection switch MPS 10-16A (CSA+UL)
9

ELECTRICAL DIAGRAM

Refer to the separately supplied electrical diagram.
10 DISPOSAL
After life of the machine, dispose it of in accordance with
federal, state or local regulations.
0507240020/010411/G Mobiflex 200-M
CE DECLARATION
EC declaration of conformity for machinery
We, Plymovent Manufacturing BV, Wezelkoog 11, 1822 BL
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the machinery:
- Mobiflex 200-M
which this declaration refers to, is/are in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2004/108 EC
- LVD 2006/95 EC
and is/are in conformity with the following harmonized
standard(s) and/or other such normative documents +
amendments, if any:
- EN ISO 12100-1:2003 (safety of machinery)
- EN ISO 12100-2:2003 (safety of machinery)
- EN ISO 13857:2008 (safety distances)
- EN-IEC 60335-1
- EN-IEC 60335-2-65
Alkmaar, the Netherlands, January 15, 2011
C.J.M. Knijn
Chief Operations Officer
EN - 15