Switching Off The Alarm - Renkforce RF-IR-Kitchen1 Bedienungsanleitung

• Navigate to the item "SOUND MELODY" and open it. Set the alarm sound here:
"BEEP"
"MELODY"
"INTERNET RADIO"
"USB"
For the alarm function using the internet radio, you need to select a station from your saved favourites. If
the internet radio station is not found during the alarm, e.g. because no wireless connection is available,
the standard signal sound is played automatically after one minute.
The USB drive with music tracks must be connected to the USB port (16) if USB is chosen. Select the track
from your USB drive with which you want to be woken up in the settings.
• Finally, set the volume at which the internet radio is to wake you up.
For this, navigate to the item "ALARM VOLUME", open it and set the desired volume.
• The alarm is now active and set up. You can now leave the menu.
"NAP ALARM"
• This alarm function is used to wake you up after a pre-set duration (e.g. for a nap after lunch).
• Select the item "NAP ALARM (TURN OFF)" in the alarm menu and set the desired time after which you want to
sound the alarm.

Switching off the alarm

• When the alarm sounds, you can switch it off at once by pushing the button STANDBY (3).
• Pushing any other button enables the snooze function. The device then switches off the alarm and will wake you
up again after 5 minutes.
• You can switch off the alarm using the STANDBY (3) button even if the Snooze function is on.
• To disable the alarm again entirely, navigate back to the menu "ALARM" and switch the enabled alarm from "ON"
to "OFF".
• The other configuration of the alarm is still retained.
All manuals and user guides at all-guides.com
Signal sound
Wake-up melody
Radio playback from the internet
Playback from the USB drive
47