Renkforce RF-IR-Kitchen1 Bedienungsanleitung Seite 41

All manuals and user guides at all-guides.com
• "PLAYBACK SETUP"
Here, you can choose how the tracks are to be played back.
- "OFF"
- "REPEAT ALL"
- "REPEAT ONE"
- "SHUFFLE"
• "DEVICE"
- "RENAME (AirMusic)"
Here, you can change the name of the internet radio for the DLNA function.
Proceed as for the password input in chapter 9 "Initial Setup" to enter the name.
- "AIR MUSIC CONTROL APP"
A QR code is shown here, which will make it easier for you to install the AirMusic Control App on your Smartphone
for DLNA-playback (if your Smartphone doesn't support DLNA-playback serially anyway).
• "EQUALISER"
Here, you can choose between different equaliser configurations.
• "RESUME WHEN POWER ON"
Select whether playback is to be continued automatically after switching off and on again with the on/off switch (12)
("ON") or if the main menu is to be displayed ("OFF").
• "SOFTWARE UPDATE"
This function is only intended for the service or initial configuration in the factory.
• "RESET TO DEFAULT"
In this menu item, you can reset the internet radio to factory settings. After you have chosen an item, you need to
confirm with "YES" or "NO".
"LOCAL RADIO"
This operating mode is described again in more detail in the chapter "Operating Mode Internet Radio".
• Here, you can select a number of local radio stations directly. The selection depends on the setting "LOCAL RADIO
SETUP" in the menu "CONFIGURATION"
• This menu item in the main menu is the same one as in the menu "INTERNET RADIO", except that you can select
it directly.
• The function can also be selected directly with the button LOCAL RADIO (10).
"MY mediaU"
This function will only be visible if you enable the item "MANAGE MY mediaU", which is found in the menu
"CONFIGURATION".
For this, observe chapter "My mediaU" of these instructions.
Track repetition off
All tracks are repeated.
The current track is repeated.
The tracks are placed in a random order.
41