ENGLISH
Door child lock disassemble
Your appliance is equipped with a door
child lock. If the door child lock is not
necessary, please follow the steps below
to disassemble it.
1. Loosen two screws on the door child lock
at left bottom corner of control panel.
2. Remove the door child lock from control
panel, and keep in safe.
Daily use
Warning! Refer to Safety chapters.
Navigating the menus
1. In the standby state, click the " " key repeatable to select the cooking mode.
2. Turn the knob to adjust the cooking temperature.
3. Click the "
" key.
4. Turn the knob to set the cooking time.
5. Click the "
" key on the knob to start cooking.
Setting time is optional.
3. Screw back the two screws into the hole
of control panel after removing the
door child lock.
Warning! Be careful not to scratch the
control panel.
13