Replacing The Filters; Maintenance And Cleaning - Cleanfix RS05 CAS Bedienungsanleitung

Replacing the filters

24
Motor protection filter
(2) change
Change exhaust air
filter
Replacing the Dust
bag

Maintenance and cleaning

25
www.cleanfix.com
A
→ After changing the fleece filter five times or after heavy contamination, the
motor filter (2) must be changed. Dismantle the filter fixation (1) and remove the used
motor protection filter, insert the new motor protection filter and press on the filter
fixation.
B
→ Remove the fixing screw (1) of the filter cover (2), remove the filter cover and
replace the exhaust air filter (3). The exhaust air filter should be replaced after
approx. 50 - 100 operating hours at the latest, or if it is heavily soiled.
C
→ Open the fixed container (1). Press the key of the upper part lid down and open
the container.
Fold the ring opening inwards and slide the dust bag with the reinforcement sleeve
onto the fitting of the suction container.
→ Before carrying out any maintenance and service work, remove the two
batteries!
→ To ensure safety and proper function, use only original
Cleanfix replacement filters. All filters must never be washed.
• Clean the device and accessories after use with a damp cloth.
• If there is a blockage, which is noticeable by a drop in suction power, stop the
motor immediately. Check the filling level of the dust bag and replace it if it is too ⅔
full.
• Check nozzles, suction tube and hose for blockage.
• In case of repair, please contact your specialized dealer or one of the authorized
service workshops. You will be served quickly and professionally.
• Our products have been tested for safety at the factory.
20
025.550