Adjusting The Cutting Height - Toro Flex-Force Power System eRecycler eS52VST Bedienungsanleitung

Adjusting the Cutting Height

DANGER
Adjusting the height-of-cut could bring your hands into contact with a moving blade and
result in serious injury.
• Shut off the motor, remove the battery, and wait for all moving parts to stop before adjusting
the cutting height.
• Do not put your fingers under the housing when adjusting the cutting height.
Adjust the cutting height as desired. Set all wheels to the same cutting height
Figure 8
12
(Figure 8).
g409499