Adjusting The Handle Height; Adjusting The Cutting Height - Toro Recycler 21770 Bedienungsanleitung

Adjusting the Handle Height

You may raise or lower the handle to a position comfortable for you.
Rotate the handle lock, move the handle to 1 of 2 positions, and lock the handle into position

Adjusting the Cutting Height

DANGER
Adjusting the cutting-height levers could bring your hands into contact with a moving blade
and result in serious injury.
• Shut off the engine and wait for all moving parts to stop before adjusting the cutting height.
• Do not put your fingers under the housing when adjusting the cutting height.
CAUTION
If the engine has been running, the muffler will be hot and can burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all wheels to the same cutting height
Figure 10
9
(Figure
(Figure 11).
10).
g356889