Storage; Troubleshooting - Silvercrest SKWE 5 A1 Bedienungsanleitung

Storage

For storage, you can hang the scales up somewhere handy using the
hanger 1.

Troubleshooting

Malfunction
The scales cannot be
switched on.
The message
appears on the
LC display 4.
The message
appears on the
LC display 4 and
cannot be reset.
appears on the
LC display 4.
If you cannot solve the problem using any of the solutions suggested above,
please contact the Customer Service department.
SKWE 5 A1
Cause
You have not removed the
plastic strip in the battery
compartment 7.
The battery is dead.
You have exceeded the
maximum weight of 5 kg
(11 lbs or 176 oz).
You have exceeded the
maximum weight of 5 kg
(11 lbs or 176 oz).
The battery is weak.
Remedy
Remove the plastic strip from
the battery compartment 7.
Replace the battery.
Remove the material from the
scales.
Reduce the amount of material
and weigh it in several steps.
Remove the material from the
scales.
Switch the scales off and on
again.
Reduce the amount of material
and weigh it in several steps.
Replace the battery.
GB │ IE │
11 ■