Mode Button - Clean Air Optima CA-104 Gebrauchsanweisung

Control panel / Operation instruction
ON/ OFF (Power)
Press the Power Button to activate the device.
Press the Power Button again, the device turns off.
The device starts in the low speed (position 8) and only the fan function and anion func-
tion is working. The anion function is automatically turned on and the negative ion
indicator

MODE Button

Press the MODE button to switch between normal wind, natural wind and sleep mode.
1. Normal wind
set by the user.
2. Natural wind
can be set to low (position 8), medium, (position 16) and strong (position 24) natural
wind in combination with the wind speed button. Natural wind is to imitate the effect
of natural wind, making the air volume softer and more comfortable. The wind speed
level indicator only shows the initial wind speed status.
The image below shows the working principle of the natural wind mode:
Wind speed table natural wind:
3. Sleep mode
lowest speed level.
Press the MODE button to switch back again in the settings before.
SPEED Button
By pressing the Speed button, you can change the speed level with the button
the button
The 24 fan speeds offers individual air flow.
24 levels are divided into three groups:
1 – 8 low level.
9 – 16 middle level.
17 – 24 high level.
8
light is on.
: The fan motor runs at a fixed speed according to the wind speed
:The fan motor runs irregularly according to the preset program and
: In sleep mode, the display will turn off and the fan is running in the
.
and