Operating Instructions - ecofort ecoQ HumidAir U1500 Bedienungsanleitung

Operating Instructions

= It is recommended that the unit is not plugged
into mains when filling with water - switch off and
unplug.
= Place unit on a smooth level surface that can
support the unit when filled with water. Lift and
remove the top small cover.
= Fill with DISTILLED water if you are in a hard water
area. DO NOT use hot water. DO NOT add fragrance or
oil to water - it will cause unit to malfunction.
NOTE: The unit has wheels due to the weight when
filled. Please use the wheels and do not carry the
unit.
CAUTION: When the unit is filled, it is heavy.
= Plug in power source and press the Power button -
the display will illuminate.
= To adjust mist intensity, press LEVEL-button until
desired level is reached
44 | ecoQ HumidAir U1500 Instruction Manual
= If the red indicator light illuminates after powering
on, either the unit is out of water or tank is not
properly aligned (see trouble shooting).
= Use the multiway directional nozzle to help mist
dispel. Ensure mist is directed away from walls and
furniture.
= Pay attention to the water level - add water when
low (red indicator light illuminates when water is
out).
= The UV-light (ultraviolet lamp) in the base of the
humidifier when turned on will kill bacteria and
germs that might be present in the water to ensure
that the mist is as clean as possible. Never try and
look directly at an ultraviolet lamp when in use as it
could damage your eyesight.
Operating Instructions
Maintenance
= Always empty the tank if not planning to use for a
few days.
= DO NOT clean whilst the unit is switched on. Turn off
power and unplug.
= Clean and rinse the water tank and mist nozzle with
lukewarm water frequently to avoid mineral build up.
= If the water tank is extremely dirty, soak with a mild
bleach and water solution and rinse clean.
= DO NOT use cleaning detergents or chemicals to
clean the tank or base. Detergent dissolved in the
water supply can interfere with the mist output.
= Wipe the exterior of the body with a damp cloth.
= Keep the nebulizer and water sensor free of mineral
deposits. Remove water tank and empty the
reservoir. Clean the nebulizer and sensor with a soft
brush (i.e. provided brush or toothbrush).
= Never immerse the base in water or let water enter
the air outlet or other openings.
= DO NOT spray water or any liquid onto the controls.
= DO NOT scrape the nebulizer or water sensor.
= DO NOT clean with tools that have metal parts.
= DO NOT leave water to sit in the tank for more than a
couple days as it may cause bacterial growth.
Storage
= When not in use, store in a cool, dry location. To
prevent dust and dirt use the packaging to repack
the unit.
= Follow the maintenance instructions.
= If water is left in the unit during storage, it may
harden and leave deposits that may affect the unit
from operating properly. Remove all water from tank
and base and let dry before storage.
= Leave the cap of the water tank loose. This will
prevent the cap and gasket from sticking together
and prolong the life of the gasket.
ecoQ HumidAir U1500 Instruction Manual | 45