Removing The Slide-In Racks; Changing The Oven Light Bulb - KKT KOLBE EB8010ED Benutzerhandbuch

Care and cleaning
3.1
3. 3

Changing the oven light bulb

The light used in oven is a special high temperature resistant
light (AC220 V, 25 W).
Um diese auszuwechseln, gehen Sie wie folgt vor:
To replace this, proceed as follows:
• Disconnect in any case the device from the power
supply (pull the plug or remove the fuse), because the
wording could be live.
• Turn the glass cover counterclockwise (4.1).
• Remove the light (4.2) and replace it with the same type.
• Screw back the cover glass clockwise.
3. 2

Removing the slide-in racks

To facilitate cleaning of the oven side walls and the slide-in
rails, you can remove the slide-in grilles.
• Remove all accessories such as grate, baking tray and
telescopic runners.
• Slightly push down the hook in racks at the clamping point
as shown (3.1).
• Swivel the rack inwards to an angle of approx. 90 degrees
(3.2-3.3).
• Unhook it at the top and carefully pull it out (3.3).
• To reinstall after cleaning, follow the steps above in reverse
order.
4.1 4. 2
43