Current Output Menu (4-20 Ma Versions Only) - GF U1000 V2 Betriebsanleitung

Password-protected menus
Instrument Type :
4-20mA
PULSE
Instrument Side :
4-20mA
PULSE
Instrument Fluid :
4-20mA
PULSE
Instrument Fluid :
4-20mA
PULSE
6.7

Current output menu (4-20 mA versions only)

Select 4-20mA :
4-20mA
PULSE
Flow @ 20mA :
4-20mA
PULSE
Flow @ 4mA :
4-20mA
PULSE
30
Heating | Chiller
Return | Flow
Glycol | Water
Glycol | Water
OFF | ON
20.00 l/min
01.500 l/min
HM versions only:
► Select the instrument setting using
The unit is preconfigured for Heating applications.
Press to confirm the setting.
HM versions only:
► Select the fluid using
The unit is preconfigured for Flow.
Press to confirm the setting.
► Select the fluid using .
Press to confirm the fluid name.
► The unit now shows the correct flow sensor separation (in
this case, "51.6mm") for the chosen values of pipe ID, pipe
material and fluid.
Make a note of the separation distance.
► Press
to return to the Main Menu.
► Enable or disable the 4-20mA output using
ON.
► Press
to confirm the setting.
► Enter the maximum flow.
► Press
to confirm.
► Enter the minimum flow.
► Press
to confirm.
► Press
to return to the Main Menu.
User Manual
.
.
to select OFF or