Installation; Important Information Before Installing; Installation Procedure - KKT KOLBE BOX 400 S/W Benutzerhandbuch

Installation

!
9.2 Important information before
installing the appliance:
• Clean the environment thoroughly
before and after installation so that
no dust or construction debris can be
sucked in during initial operation.
• Only install the unit in a suitable
location.
• Check the ceiling for load-bearing ca-
pacity: It must be able to bear a weight
of min. 120kg and be min. 30mm thick.
• Check the routing of electrical and
other cables on and in the wall or cei-
ling so that they are not drilled into.
• Check the condition and load-bearing
capacity of the electrical cables.
!
During and after installation of the appli-
ance, use a spirit level to ensure that the
cooker hood is level.
Otherwise, grease and/or condensation
may accumulate in the corners of the
appliance.
The installation of the appliance
by a specialist is recommended.
54

9.3 Installation procedure

Edges and internal components can be
sharp-edged and cause injuries.
Exercise appropriate caution and pro-
tect yourself if necessary, e.g. with work
gloves.
• Select the mounting material accor-
ding to the nature of the ceiling on
which the hood is to be installed:
For a concrete ceiling, use the expan-
sion screws supplied, for a ceiling
made of wood or comparable mate-
rial, use the plastic plugs and screws
supplied.
If in doubt, consult a suitably qualified
specialist or the customer service.
• Position the suspension plate on the
ceiling as desired, mark the position of
the holes and drill the holes according
to the required dowels or screws.
• Attach the suspension plate to the
ceiling with the appropriate mounting
material (as described above).