KKT KOLBE BOX 400 S/W Benutzerhandbuch Seite 55

Installation
To do this, push the plastic dowels or
screw bodies of the expansion screws
supplied into the drill holes and screw
the plate to them with the 6×40 mm
screws or the nuts of the expansion
screws (including spiral rings and
washers).
• Connect the decor panel to the sus-
pension plate with the two 4×8 mm
screws supplied.
• Slightly press the tips of the rope hol-
ders and insert the rope directly.
The rope is automatically blocked.
Adjust the length of the rope accor-
ding to your individual requirements.
Note:
The ropes can only be moved while
holding down the tips of the rope
holders.
Press
• Lift the cooker hood upwards (at
least two people are recommended).
Attach the ropes to the brackets provi-
ded on the top of the cooker hood.
Note:
Adjust the rope length to your indivi-
dual needs beforehand.
Insert rope /
Pull down
55