Cleaning And Maintenance - cecotec CONGA POPSTAR 2900 ERGOFLEX ANIMAL Bedienungsanleitung

ENGLISH
Do not use the brush on long pile carpets, animal hair, or fringes.

5. CLEANING AND MAINTENANCE

Important: Before cleaning the appliance or performing any maintenance on it, make sure that
the product has been unplugged from the mains supply.
Switch off the appliance and let it cool before undertaking any cleaning task.
Clean the outside of the appliance with a damp cloth. Do not use abrasive products or solvents.
Do not immerse the whole unit into water or other liquids. Make sure that no water enters the
appliance.
Remove any dirt (hair and other fibres) tangled around the Multipurpose brush and wheels.
How to clean the dust tank and filter:
Remove the handheld vacuum cleaner from the main body. Open it by pressing the release
button for the dust tank.
Take out the high-efficiency filter and filter protector. Empty the dust tank and clean the filter.
If the parts are heavily soiled, wash the dust tank, the filter, and the filter protector with
running water and mild detergent. Make sure to dry all parts completely before re-attaching
them to the appliance.
Warning: If the filter is not completely dry, the vacuum cleaner will drastically lose suction
power.
Fig. 8
Note: it is recommended to clean the dust tank and filter after every use. The vacuum cleaner
does not work at full potential if the dust tank is full. The high-efficiency filter is washable, and
it is recommended to change it annually.
How to clean the Multipurpose brush:
Unlock the Multipurpose brush from the suction head. Take it out and remove any dirt (hair and
other fibres) tangled around the roller.
Wash the brush under running water with mild detergent. Make sure to dry it completely
before re-attaching it to the suction head.
Fig. 9
33