Wiring Diagram - Royal Catering Rcic-50Sf Bedienungsanleitung

The "FAULT"
light is on
continuously.
The "ICE FULL"
light is blinking.
"WATER LOW"
and "ICE FULL"
controls light up
at the same
time.

WIRING DIAGRAM

CP - Control panel
T1, T2, T3 - temperature sensors 1,2 and 3
SQ3 - Water level sensor
a) Ice flakes are not fully
formed.
a) The ice level sensor is
not making proper
contact, i.e. is blocked
or defective.
a) The water supply is
blocked and causes an
error due to too low
ambient temperature.
c) Check if the fan starts.
a) Check if the solenoid
opens. If not, replace it
with a new one.
a) Check and, if necessary,
replace the sensor with
a new one.
a) Stop the unit and wait
until the ambient
temperature rises to 10
C or contact an
authorized service
center.
°