3M PELTOR Bull's Eye I Bedienungsanleitung Seite 7

EN
3. APPROVALS
3.1. EU AND GB APPROVALS
EU
Hereby, 3M Svenska AB declares that the PPE type
earmuff is in compliance with Regulation (EU) 2016/425
and other appropriate directives to fulfill the requirements
for the CE marking.
Bull's Eye I H515FB: The PPE is audited annually by
SGS Fimko Ltd., Takomotie 8, FI-00380 Helsinki, Finland
Notified Body No. 0598 and type approved by PZT GmbH,
Bismarckstrasse 264 B, 26389 Wilhelmshaven, Germany,
Notified Body No. 1974.
Bull's Eye III H540A: The PPE products are audited
annually and type approved by SGS Fimko Ltd.,
Takomotie 8, FI-00380 Helsinki, Finland, Notified Body
No. 0598.
The product has been tested and approved in
accordance with EN 352-1:2020.
GB
Hereby, 3M Svenska AB declares that the PPE type
earmuff is in compliance with Personal Protective
Equipment Regulations (Regulation 2016/425 as brought
into UK law and amended).
The PPE is audited annually, and type approved by SGS
United Kingdom Limited, Rossmore Business Park,
Ellesmere Port, Cheshire CH65 3EN, UK, Approved Body
No. 0120.
The product has been tested and approved in accordance
with EN 352-1:2020.
0120
EU and GB
The UKCA approval might not apply to all products.
The applicable legislation can be determined by
reviewing the Declaration of Conformity (DoC) at
www.3M.com/PELTOR/doc. The DoC will also show if
some other type-approvals are also applicable. When
retrieving your DoC, please locate your part number.
The part number of your earmuffs can be found printed
on the cup.
A copy of the DoC and additional information required
in the Regulations and Directives can also be obtained
by contacting 3M in the country of purchase. For contact
information, see last pages of this user instruction.
4. EXPLANATION OF STANDARD TABLES
4.1. EUROPE
3M strongly recommends personal fit testing of hearing
protectors. Research suggests that users may receive less
noise reduction than indicated by the attenuation label
value(s) on the packaging due to variation in fit, fitting skill,
and motivation of the user. Refer to applicable regulations
and guidance on how to adjust attenuation label value(s).
In the absence of applicable regulations, it is
recommended that the attenuation label value(s) be
reduced to better estimate typical protection.
4.2. EUROPEAN STANDARD EN 352
EN 352-1 Sound attenuation and sizing
Table ref.
A:A Foldable headband earmuff with foam
cushions
A:B Headband earmuff with foam cushions
A:1
f = Octave-band centre frequency (Hz)
A:2
MV = Mean Value (dB)
A:3
SD = Standard Deviation (dB)
A:4
APV* = MV - SD (dB)
*Assumed Protection Value
A:5
H = Hearing protection estimation for high
frequency sounds (ƒ ≥ 2000Hz).
M = Hearing protection estimation for
medium frequency sounds
(500Hz < ƒ < 2000Hz).
L = Hearing protection estimation for low
frequency sounds (ƒ ≤ 500Hz).
SNR = Single Number Rating of hearing
protector performance
A:6
S = Small
M = Medium
L = Large
2
Description