Designated Use; Personnel Authorized To Carry Out Repairs - Endress+Hauser Proline 300 Installationsanleitung

2

Designated use

The spare part sets and Installation Instructions are used to replace a faulty unit with a
functioning unit of the same type. Only original parts from Endress+Hauser may be used. Only
spare parts kits designed by Endress+Hauser for the measuring device can be used at any
time.
Inspection is performed using the W@M Device Viewer. The procedure involved is described
as follows.
A spare parts overview is located in the interior of some measuring devices. If the spare
parts kit is specified on this list, no inspection is required.
1.
www.endress.com/deviceviewer
2.
Ser. No.: 12345
3

Personnel authorized to carry out repairs

Authorization to carry out repairs depends on the measuring device' s approval type. The table
below shows the authorized group of people in each case.
Whoever carries out the repairs has full responsibility to ensure that work is carried out
safely and to the required quality standard. He/she must also guarantee the safety of the
device following repair.
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/alteration must be performed under supervision.
Endress+Hauser
Order code Description
3.
=
?
4.
1. www.endress.com/deviceviewer
2. Enter serial number (ser. no.), search for product
data and click Spare Parts.
3. All spare parts for the measuring device are
displayed.
4. Determine the order number of the spare parts kit.

The spare parts kit may be used only if the order
number of the spare parts kit corresponds to an
order number on the spare parts list.
Personnel authorized to carry out repairs
EA01146D
1)
1, 2, 3
1, 2, 3
4
5