Appropriate Use; Authorized Personnel - Endress+Hauser Promag Einbauanleitung

Protective Cover connection compartment

Appropriate Use

The spare parts set and Installation Instructions are used to replace a faulty unit with a functioning unit of the same type. Use genuine
parts from Endress+Hauser only.
Only original spare parts supplied by Endress+Hauser shall be used with the measuring device.
The verification has to be done via W@M Device Viewer, this procedure is explained below.
For some devices there is an overview of the correct spare parts inside the connection compartment cover.
If the spare part is listed there, the verification is no longer required.
1. www.endress.com/deviceviewer
2.
Ser. No.: 12345

Authorized personnel

NOTICE
The person who carries out the repair is responsible for safety during the work, the quality of work completed and safety of the device
after repair.
Approval of the measuring device
without approval
with approval (e.g. IECEx)
1 = Trained customer technician
2 = Service technician authorized by Endress+Hauser
3 = Endress+Hauser (send measuring device back to manufacturer)
2
Order code Description
3.
=
?
4.
A0022408
www.endress.com/deviceviewer
1.
Enter the serial number (Ser. No.), search for product data and click
2.
on „spare parts".
Display of all suitable spare parts.
3.
Check the order number of the spare part.
4.
Does the order number of spare part correspond to the order number in
the spare part list?
= Yes, the spare part can be used.
= NO, the spare part may not be used.
Group of persons authorized to carry out repairs
EA01146
1, 2, 3
1, 2, 3
Endress+Hauser