Cleaning And Maintenance - Grundig VCR 4230 Bedienungsanleitung

5 Operation
5.3.2 Wet mopping setting
You may start the cleaning operation by selecting the cleaning mode and set the
level of wetness during mopping as desired in the application.
It is suggested remove carpets from the floor to prevent the device from wetting the
carpet when mopping the floor.

6 Cleaning and maintenance

Turn off the appliance and unplug it before cleaning it.
WARNING: Never use gasoline, solvent, abra-
A
sive cleaners, metal objects or hard brushes
to clean the appliance.
6.1 Cleaning the dust container and filters
You may call our call center to order a new filter when your filter reaches
C
the end of its expected life, is deformed or needs to be replaced for a rea-
son.
To achieve the maximum performance with EPA filter, clean it with a brush after
each cleaning.
C
EPA filter is a replaceable accessory.
If you performed a cleaning operation in a space where there is construc-
tion dust and dust with very tiny particles, replace your filter with a new
one in order not to experience a loss of performance.
1. Remove the dust container and the water tank assembly (2 in 1) by pressing the
button as shown below.
58 / EN
Robot Vacuum / User Manual