Grundig VCR 4230 Bedienungsanleitung Seite 53

5 Operation
Spot Cleaning (supported with the relevant mobile application only)
1.5m Move the sweeping robot to the area to be cleaned, press the
twice. After the mode is activated, the sweeping robot will sweep the
circular area with a diameter of 1.5 m calculated from its own posi-
tion.
C
The sweeping robot cannot enter the fixed-point sweeping mode on the
recharging dock.
Vacuum power selection
(Supported with the relevant mobile application only) You may select the desired
cleaning power from the application:
• Quiet
• Standard
• Powerful
• Maximum
Remote controlled cleaning
(Supported with the relevant mobile application only) You may direct the robot vac-
uum cleaner to the area to be cleaned by using the manual remote control mode
through the application.
Sleep
If it is inactive and the charging dock is not connected for 10 minutes, the machine
will automatically switch to hibernation mode.
The robotic vacuum cleaner will switch to the sleep mode automatically if there is
operation within 10 minutes after it is fully charged.
Resetting the system
For APP account delete, the customer can press "remove the product and clear the
account" button on the APP to delete all the data on the APP and cloud like clean
histories, shared machine, WIFI account password...etc.
Press " " button for 15 seconds in standby position to reset the system. When the
system is reset, the original settings on the robot vacuum cleaner are deleted.
Robot Vacuum / User Manual 53 / EN